Noise floor level (1-7) (Default: 2) The noise floor level is compared to a known reference voltage. If this level is exceeded the chip will issue an interrupt to the IRQ pin, broadcasting that it can not operate properly due to noise (INT_NH). Check datasheet for specific noise level tolerances when setting this register.
Indoors/Outdoors Indoors Outdoors
Mask Disturber Yes No
Spike rejection (1-11) (Default: 2) This setting, like the watchdog threshold, can help determine between false events and actual lightning. The shape of the spike is analyzed during the chip's signal validation routine. Increasing this value increases robustness at the cost of sensitivity to distant events.
Watchdog Threshold (1-10) (Default: 2) This setting determines the threshold for events that trigger the IRQ Pin.
Lightning Threshold (1,5,9,16) (Default: 1) The number of lightning events before IRQ is set high. 15 minutes is The window of time before the number of detected lightning events is reset. The number of lightning strikes can be set to 1,5,9, or 16.
TuneCap (Default: 0) This setting will add capacitance to the series RLC antenna on the product to help tune its resonance. The datasheet specifies being within 3.5 percent of 500kHz to get optimal lightning detection and distance sensing. It's possible to add up to 120pF in steps of 8pF to the antenna.
Division ratio (Default: 0) The antenna is designed to resonate at 500kHz and so can be tuned with the following setting. The accuracy of the antenna must be within 3.5 percent of that value for proper signal validation and distance estimation.
Save